DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-257ATM-TRK (Circuit Emulation Service Circuit Pack)
9
ATM-TRK-related commands
Table 9-116 lists some commands that can be useful in troubleshooting ATM
errors and alarms.
Table 9-115. ATM-TRK LED interpretation
LEDs Condition LED status
Red Error (alarm logged) On
Red and
Green
Booting (LEDs being tested) Blinking (on 200 ms, off 200 ms)
Green Test/maintenance in progress On
Yellow Fiber Loss of Signal (LOS), LOF, MS_RDI,
MS_AIS, LCD, HP_RDI, HP_AIS, LOP, PSC
Blinking fast (100 ms on, 100 ms off)
Yellow Signal to ATM switch down Blinking slowly (500 ms on, 500 ms off)
Yellow One or more CES signaling groups
administered
On
Yellow CES signaling group not administered or
not reporting to firmware
Off
Continued on next page
Table 9-116. ATM CES troubleshooting commands
Command Description
display circuit-packs
cabinet
Displays the circuit packs in the cabinet, identifying ATM Trunk as well
as ATM PNC EI boards. “ATM Interface” boards have not been
administered as CES or PNC.
display atm ports
UUCSSppp
Displays the 256 ports on the ATM board with the corresponding
signaling and trunk group.
list configuration
atm
Lists the ATM boards, identifying equipment location, board code,
type, and vintage.
list configuration
trunks
Lists boards identifying assigned ports. While the ATM board is listed,
the 256 ports are not.
Continued on next page
