DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-56change system-parameters maintenance
8
4. If daily scheduled maintenance must be prevented from starting during a
maintenance procedure, set the
Start Time
field to a time after the
session will end. If daily Scheduled Maintenance is already running and
needs to be shut off, set the
Stop Time
field to one minute after the
current time.
5. Press
Enter and verify that the screen displays the message:
Command successfully completed
NOTE:
For earlier releases of system software, disable Cleared Alarm
Notification and Restart Notification before submitting the form.
NOTE:
When finished working on the switch be sure to return all fields to
their original settings.
Examples
change system-parameters maintenance
Output
An input form is displayed with the following fields. Defaults for data entry fields
are listed in parentheses.
The following display shows a typical result when
change system-parameters
maintenance
is entered.
