DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1931WAE-PORT (Wideband Access Endpoint Port)
9
network facilities. However, because maintenance capabilities are limited to the
Wideband Access Endpoint interface, and because faults can occur end-to-end,
troubleshooting procedures based on an end-to-end view of the network is
required.
Wideband access endpoint port maintenance provides a strategy to maintain a
wideband access endpoint port via a port on the Universal DS1 interface circuit
pack hardware. The maintenance strategy covers logging wideband access
endpoint port hardware errors, running tests for port initialization, periodic and
scheduled maintenance, demand tests, and alarm escalation and resolution. Two
different port service states are specified in the wideband access endpoint port
maintenance:
■
out-of-service
: the port is in a deactivated state and cannot be used for
calls
■
in-service
: the port is in an activated state and can be used for calls
If the UDS1 Interface circuit pack is out of service, all ports on it are taken
out of service and a Warning alarm is raised.
Error Log Entries and Test to Clear Values
Table 9-715. Wideband Access Endpoint Maintenance Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
0
1
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the appropriate
test description and follow the recommended procedures.
0 Any Any Any test access-endpoint
extension
sh r 1
18(a) 0 busyout access-endpoint WARNING OFF release access-endpoint
extension
130(b) None WARNING ON test access-endpoint
extension
1281(c) Conference Circuit (Test
#7)
MINOR ON test access-endpoint
extension
l r 4
1537(d) NPE Crosstalk Test (#6) MINOR ON test access-endpoint
extension
l r 3
1793(e) None test board
UUCSS
long
3840(f) Any Port Audit and Update
(Test #36)
