DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-67clear link n
8
!
WARNING:
This command can mask actual hardware problems since firmware is
cleared and appears as if no problems were ever encountered.
Parameters
For more information see Common Output Fields at the beginning of this chapter.
clear link n
This command clears the counters associated with a numbered PPP C-LAN link.
The clear clan-port command accomplishes the same thing. The statistical
counters cannot be cleared for an Ethernet C-LAN link.
clear pgate-port
clear pgate-port UUCSSpp
The
clear pgate-port
command clears the hardware error counters associated
with the specified packet gateway port by performing a reset. If the number of
the link assigned to the port is known,
clear link
accomplishes the same thing.
For more information see Common Input Parameters and Common Output Fields
at the beginning of this chapter.
disable suspend-alm-orig
This command disables one or more active Suspend Alarm Origination entries.
Synopsis
disable suspend-alm-orig (board location).
Examples
disable suspend-alm-orig 1C03
disable suspend-alm-orig 1E07
UUCSS The specified location must be occupied by an SNI, SNC or DS1C circuit
pack. All circuit packs on the standby PNC can be cleared at once by
specifying a- or b-pnc. To do so, the standby PNC must first be busied out.
