
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1464SNI-BD (SNI Circuit Pack)
9
136 FAIL The SNI’s administered neighbor does not match the physical neighbor
connected. The type of neighbor administered is an SNI and the type of
neighbor physically connected is an EI. Enter list fiber-link and verify that the
fiber optic cable and metallic cable connections are installed as administered.
137 FAIL The SNI’s administered neighbor does not match the physical neighbor
connected. The type of neighbor administered is an EI and the type of
neighbor physically connected is an SNI. Enter list fiber-link and verify that
the fiber optic cable and metallic cable connections are installed as
administered.
138 FAIL The physical neighbor location does not match administered neighbor
location. The carrier and slot of the administered neighbor do not match the
carrier and slot of the physical neighbor. Enter list fiber-link and verify that the
fiber optic cable and metallic cable connections are installed as administered.
If the problem does not seem to be caused by a physical connection problem
or an administration problem, replace the neighbor circuit pack. It is possible
for the neighbor circuit pack to have a hardware problem that causes it to
report a wrong angel address (physical carrier/slot address) to software.
139 FAIL The SNI is administered to be connected to a DS1C but is not physically
connected to a DS1C.
If a DS1C is not supposed to be connected to this SNI
,
change administration to remove the DS1 converter complex from the fiber link
associated with this SNI by:
1. Determine which fiber that this SNI is an endpoint of by checking list
fiber-link.
2. Remove this fiber with the remove fiber-link command.
3. Add the fiber back via add fiber-link, and do not administer the DS1
converter complex at this time.
Table 9-562. TEST #759 Configuration Audit — Continued
Error
Code
Tes t
Result Description/ Recommendation
Continued on next page