DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-89display errors
8
display errors
display errors [high-resolution] [print | schedule]
The
display errors
command brings up an input form that allows you to select
which errors will be displayed on the hardware error report.
Errors can result from in-line firmware errors, periodic tests, failures detected
while executing a test command, software inconsistency, or a data audit
discrepancy. The Error Log is restricted in size. A new entry overwrites the oldest
unalarmed entry. The overwritten entry must be at least six minutes old, or the
new entry is dropped.
Help Messages
The following help message will be displayed when the first page of a multiple
page list of alarms/errors or after the
Prev Page key is pressed:
Press CANCEL to abort or NEXT PAGE for next page
The following help message will be displayed after the
Next Page key is pressed
and there are more pages of alarms/errors to be displayed:
Press CANCEL to abort, NEXT PAGE for next page, PREV PAGE for
previous page
The following help message will be displayed after the
Next Page key is pressed
and there are no more alarms/errors to be displayed:
Press CANCEL to abort, NEXT PAGE to complete, PREV PAGE for
previous page
Actions
The following command will display the next page of alarms/errors or echo
“Command successfully completed” and exit if there a no more pages of
alarms/errors to display:
Next Page
The following command will display the previous page of alarms/errors and the
“press CANCEL to abort or NEXT PAGE for next page” help message:
Prev Page
Name
Administered name from the data module forms (Processor
Interface, X.25, Ethernet, and PPP)
