DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-308status switch-node
8
status switch-node
status switch-node
SN# [print]
This command displays the operational status and attributes of the user
specified switch node. The operational status of the active and standby switch
node Clock(SNC) circuit packs for the switch node are displayed along with any
alarms logged against the specified switch node.
Parameters
Output
A line of information is displayed for each switch node carrier.
SN number
Normally switch node 1 is located in the PPN cabinet, and switch node
2, if present, is located in the nearest EPN cabinet. The switch node
number defaults to 1.
Switch Node The switch node number, 1 or 2. If the PNC is duplicated, the A and B
PNCs are each reported separately.
Location The physical position of the switch node carrier represented as "UUc".
Where "UU" represents the cabinet number and "c" represents the
carrier. The simplex PNC configuration will display only one switch
node location, while the duplex PNC configuration will display the
active and standby switch node locations.
status station 1002
GENERAL STATUS
Type: 7405D Service State: in-service/on-hook
Extension: 1002 Maintenance Busy? no
Port: 01C0702 SAC Activated? no
Call Parked? no User Cntrl Restr: none
Ring Cut Off Act? no Group Cntrl Restr: none
CF Destination Ext:
Message Waiting:
Connected Ports:
ACD STATUS HOSPITALITY STATUS
Agent Logged In Work Mode AWU Call At:
DND: not activated
Room Status: non-guest room
On ACD Call? no
