A SERVICE OF

logo

DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1657TAPE
9
complete. During that time, the
reset tape
command entered in the
next step causes a "please wait" message to flash on the terminal
screen while the tape is retensioning, but the command will
complete after the retension pass completes.
12. Reset the Tape circuit pack using the
reset tape c
command where
c
is
the carrier number (a or b). This will clear out a tape error that indicates
the tape cartridge had been removed and reinserted.
13. Release the Tape from its maintenance busy-out state using the
release
tape c
command where
c
is the carrier number (a or b).
Figure 9-104. Mass Storage System Interactions
Capstan Slot
Picture #2
Label
Picture #1
R/W
Head Slot