DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-127list configuration
8
list configuration
list configuration hardware-group [print | schedule]
NOTE:
The
list configuration software-version
command is discussed
separately under its own heading.
Hardware configuration reports list, for each circuit pack in the group specified,
the type, code, suffix, and vintage of the requested circuit packs as installed in
the switch, and all ports assigned to the circuit pack.
Parameters
Enter one of the following hardware groups.
■ all—
Specifies the display of all circuit packs administered and/or
physically inserted in port, switch node and control carriers on the entire
system.
■ board
UUCSS
—Specifies the display of all assigned ports on the circuit
pack specified by cabinet, carrier and slot.
■ carrier
c
—Specifies the display of all circuit packs and assigned ports on
a specified carrier.
■ control—Specifies the display of all circuit packs located in the control
complex.
Interface Link
Identifies the physical link carrying this processor (virtual)
channel. Links numbered 1 through (4 times the number of PI
circuit packs) for the si model can be either
x.25
or
tcp/ip
. The
rest of the links (up to 25) must be
tcp/ip
.
Interface Chan
Identifies the BX.25 virtual channel number or the TCP/IP listen
port channel to carry this processor (virtual) channel. The channel
number 0 means any port can be used. Valid entries for link type
x.25 are
1
-
64
; for Ethernet or ppp,
0
,
5000
-
64500
.
Destination Node
Identifies the switch or adjunct at the far end of this link. Enter an
adjunct name, switch name, far end IP address, node ID, or leave
blank (default) for services local to this switch.
Destination Port
Identifies the port number of the destination. The number 0 means
any port can be used. Valid entries are
0
(default),
5000
-
64500
.
Session Local
Field ported forward from R6.
Session Remote
Field ported forward from R6.
Mach ID
Field ported forward from R6.
