DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-160ATM-BCH (ATM B-Channel Trunk)
9
2000
2012
None
ABORT Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
2035 ABORT Call timed out
1. Wait 1 minute, and try again.
2036-
2037
ABORT Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
2038-
2039
ABORT Problem reading test data
1. Wait 1 minute, and then try again.
2. If the test aborts again, there is a serious internal problem.
2040 ABORT Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
2041 ABORT Call timed out
1. Wait 1 minute, and try again.
2066 ABORT Could not establish test call
1. Retry the command up to 5 times at 1-minute intervals.
2067 ABORT Call timed out
1. Wait 1 minute, and try again.
2074 ABORT Bit and Block Error query failed
1. Retry the command up to 5 times at 1-minute intervals.
2. If the test continues to abort, there may be a serious internal problem in
the Maintenance/Test Digital Port. See the M/T-DIG (Maintenance/Test
Digital Port) maintenance object.
2075 ABORT Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2201-
2205
ABORT Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
2206 ABORT Could not allocate needed resources
1. Retry the command at 1-minute intervals a maximum of 5 times.
Table 9-68. TEST #258 ISDN Test Call — Continued
Error
Code
Tes t
Result Description/ Recommendation
Continued on next page
