Management Terminal
3-1Terminals Supported
3
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
3
Management Terminal
The management terminal is used to enter commands and monitor operations
through the maintenance user interface.
Chapter 8, ‘‘Maintenance Commands’’
describes the commands available to the maintenance user.
Terminals Supported
Refer to
DEFINITY Enterprise Communications Server Installation and Test for
Multi-Carrier Cabinets
, and the user manual on your terminal model for setup
instructions.
Multiple Access
Release 7r allows multiple users to perform maintenance and administration at
the same time:
■ This system has a security feature to allow the customer to define their
own logins and passwords and to specify a set of commands for each
login. It allows up to 11 customer and 4 services logins. Each login name
can be customized.
■ Login Security Violation Notification Following a Security Violation and
Login Kill after “N” Attempts features notifies a referral point, and disables
a login ID (Customer or Lucent Services logins) following a security
violation (a user defined security violation threshold). The Login Kill after
“N” Attempts feature will not disable the last remaining inads type login.
Lucent Services logins require a Lucent init level login ID to re-enable
logins that have been disabled by a security violation or the command
disable login.
