DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Alarms, Errors, and Troubleshooting
5-39ATM Tips
5
Figure 5-17. Screen output for the show signaling summary command
a. If an A500 port to which a DEFINITY port network is attached is not
listed in this display, it is likely that the port was administered
incorrectly as having no UNI signaling (
admin link
command).
Ensure that fields listed have the values indicated below.
2. If the A500 was administered using hard-coded PNNI routes to identify
each endpoint, enter
show signaling routes
on the A500 console. Figure
5-18 shows the screen output from the command.
Field Value
IntType Network
If it is User, links will not come up between the PPN and
the EPN.
Signaling UNI3.1
If it is UNI3.0, links will not come up between the PPN
and the EPN.
ILMI Preferred value of is No, however this alone does not
prevent links from coming up between the PPN and an
EPN.
SAP State May or may not be UP. Their values depend on more
than just whether the port was marked as UP. (See
highlighted data for SAP State in
Figure 5-17.)
A500:show signaling summary
Port loc VCI SAP IntType Signaling ILMI SAP State State
------ ------- --- ------- ----------- ---- ------------ -----
A1.1 1 1 Network UNI3.1 No UP UP
A1.2 2 2 Network UNI3.1 No UP UP
