DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1911VC-BD
9
Reset the circuit pack by executing the
busyout board UUCSS
,
reset
board UUCSS
, and
release board UUCSS
commands. When it is reset,
the circuit pack executes a set of tests to detect the presence of any of the
above faults. The detection of one these errors during initialization causes
the circuit pack to lock-up and appear insane to the system. See the repair
procedures in footnote (a) for error type 1.
e. The circuit pack detects a program logic error. While no action is required,
this error may lead to errors of other types being reported against this
circuit pack.
f. The circuit pack cannot update NPE memory and read it back. This error
type can be ignored, but it may lead to other error types being reported
against this circuit pack.
g. A critical hardware failure has been detected on the circuit pack. Use
busyout board UUCSS, reset board UUCSS
, followed by
release board
UUCSS
. If test #53 passes, the on-board circuitry is healthy. Use
test
board UUCSS long clear
to retire the alarm. If test #53 fails, replace the
circuit pack.
h. The circuit pack detected a critical hardware failure. Reset the circuit pack
by issuing the
busyout board UUCSS
,
reset board UUCSS
, and
release
board UUCSS
commands. If the Circuit Pack Restart Test (#594) passes,
then the on-board circuitry is healthy. Retire the alarm by issuing the
test
board UUCSS long clear
command. If the Circuit Pack Restart Rest
(#594) fails, replace the circuit pack.
The reported error types correspond to the following detected errors:
i. The circuit pack is hyperactive — it is flooding the switch with messages
sent over the control channel. The circuit pack is taken out of service when
a threshold number of these errors is reported to the switch. Clear the
alarm by using
busyout board UUCSS
,
reset board UUCSS
,
test board
UUCSS long clear
, and
release board UUCSS
. If the error recurs within
10 minutes, then replace the circuit pack.
Error Description
1293 On-board auxiliary processor insane
1294 Internal memory access error
