DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1540STRAT-3 (Stratum 3 Clock)
9
Error Log Entries and Test to Clear Values
Notes:
a. This error type corresponds to FAIL code 1 of the Stratum 3 Clock Alarm
Query (test #649): either reference A failed or the CI card A failed.
b. This error indicates that Synchronization Maintenance has been disabled
via the disable synchronization-switch command. Execute the enable
synchronization-switch command to enable Synchronization
Maintenance reference switching and to resolve this alarm.
c. This error type corresponds to FAIL code 2 of the Stratum 3 Clock Alarm
Query (test #649): one power supply failed.
d. This error type corresponds to FAIL code 4 of the Stratum 3 Clock Alarm
Query (test #649): one clock unit failed.
e. This error type corresponds to FAIL code 8 of the Stratum 3 Clock Alarm
Query (test #649): either reference B failed or the CI card B failed.
Table 9-586. Stratum 3 Clock Error Log Entries
Error
Type
Aux
Data Associated Test Alarm Level
On/Off
Board Test to Clear Value
0
1
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the appropriate
test description and follow the recommended procedures.
0 Any Any Any test synchronization r 4
1(a) Any Stratum 3 Clock Alarm
Query (#649
MINOR OFF test synchronization r 4
18(b) 0 disable sync WARNING OFF enable sync
257(c) Any Stratum 3 Clock Alarm
Query (#649)
MINOR OFF test synchronization r 4
513(d) Any Stratum 3 Clock Alarm
Query (#649
MINOR ON test synchronization r 4
769(e) Any Stratum 3 Clock Alarm
Query (#649)
MINOR ON test synchronization r 4
1025(f) Any Stratum 3 Clock Alarm
Query (#649)
MINOR/
MAJOR(h)
ON test synchronization r 4
1281(g) Any Stratum 3 Clock Alarm
Query (#649)
MINOR
/MAJOR(h)
ON test synchronization r 4
1537(i) none MINOR/
MAJOR(h)
ON
1793(j) none MINOR/
MAJOR(h)
ON
