DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-5Common Output Fields
8
Common Output Fields
■ An indication that the command successfully completed or a
self-explanatory message giving a reason for a failure or abort.
■ An input form for entering additional information required to complete the
command. These are described under each command that presents an
input form.
■ A form listing one or more lines of results with error codes that indicate the
reason for a FAIL or ABORT result.
Many commands that use the last form display the fields listed in the table below.
Some return one line of output. Other commands that run either one test on
several objects or several different tests on one or more objects return several
lines of output. In this case, each line represents one test result.
The length of this variable differs for the various types of commands. A port
circuit requires a full length address such as 11C1502, which indicates circuit
number 2 on the circuit pack in cabinet 11, carrier C, slot 15. A control carrier
component such as a SYSAM circuit pack is designated simply as
01B
,
indicating the SYSAM in carrier B of cabinet 1, the PPN cabinet.
Some MOs such as TDM-BUS are addressed by PN number. In this case, the
number is usually preceded by PN. For example, TDM bus A in port network 5 is
designated as
PN 05A
.
In critical reliability systems, Port Network Connectivity is duplicated as two
independent sets of PNC components. These are designated as A-PNC and
B-PNC.
Variable Range Meaning
UU 1-22 One or two-digit cabinet number
C A-E Letter designation of a circuit pack carrier
SS 1-21 One or two-digit number identifying a circuit pack slot on a carrier
pp 1-24 One or two-digit number identifying an individual port circuit on
circuit pack
Port
The address or physical location of the MO. Usually this is
UUCSSpp
.
