DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-886GPTD-PT (General Purpose Tone Detector Port)
9
GPTD-PT (General Purpose Tone
Detector Port)
The General Purpose Tone Detector (GPTD) Ports, also known as Call Progress
Tone Receivers (CPTR), reside on the following circuit packs:
■ TN748 all suffixes (mu-law companding)
The GPTD port performs level measurements of test tones and to detect call
progress tones. Examples of call progress tones are dial tone, ring back, busy,
alert, confirmation, and recall dial. The abilities of the GPTD port to perform level
measurements of test tones and to detect call progress tones are essential for
maintenance of other circuit packs (for example, Tone-Clock).
The GPTD maintenance object defines a set of tests to ensure that the general
purpose tone detection capability of the GPTD port is functioning properly. For all
Tone Detector circuit pack level errors (DETR-BD), refer to “XXX-BD (Common
Port Circuit Pack)”.
Error Log Entries and Test to Clear Values
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run
1
1. UU is the universal cabinet number (1 for PPN, 2 -44 for EPN s). C is the carrier designation (A, B,
C, D, or E). SS is the number of the slot in which the circuit pack resides (01 to 21). pp is the two
digit port number (01, 02, ...).
Full Name of MO
GPTD-PT MAJOR test port UUCSSpp sh General Purpose Tone Detector Port
GPTD-PT MINOR test port UUCSSpp sh General Purpose Tone Detector Port
GPTD-PT WARNING release port UUCSSpp General Purpose Tone Detector Port
Table 9-337. General Purpose Tone Detector Port (CPTR) Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
0
1
0 Any Any Any test port UUCSSpp sh r 1
1 17664 Tone Detector
Audit/ Update Test
(#43)
MAJOR/
MINOR (a)
ON test port UUCSSpp r 2
18 0 busyout port
UUCSSpp
WARNING ON release port UUCSSpp
130 (d) None WARNING ON test port
UUCSSpp
sh r 2
Continued on next page
