DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-908HYB-LINE (Hybrid Line)
9
Error Log Entries and Test to Clear Values
Notes:
a. The data link between the port and the terminal is not operational. (An
off-board problem was detected by port circuit). Verify that the Hybrid set
is connected and that the Electronic Power Feed (EPF) test passes. If data
transmission problems are experienced, check for defective wiring or a
defective voice terminal, or move terminal closer to the switch (reduce the
Table 9-347. Hybrid Line Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
0
1
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.
0 Any Any Any test port UUCSSpp sh r 1
1(a) 40987 None WARNING OFF
15(j) Any Hybrid Line Audits
Test(#161)
18(b) 0 busyout port
UUCSSpp
WARNING OFF release port UUCSSpp
130(c) None WARNING ON test port UUCSSpp sh
257(d) 40988 None MIN/WRN OFF
513(e) 40965 Hybrid Line Audits
Test (#61)
WARNING OFF test port UUCSSpp sh r 4
769(f) Remote Dig
Looparound Test
(#59)
WARNING OFF test port UUCSSpp sh r 3
1025 Hybrid & Conf.
Circuits Test (#57)
MIN/WRN ON test port UUCSSpp l r 3
1281(f) Local Digital
Looparound Test
(#58)
WARNING ON test port UUCSSpp l r 3
1537(g) 40968 None WARNING OFF
1793 TDM NPE Crosstalk
Test (#6
MIN/WRN
2
2. Major or minor alarms may be downgraded to Warning alarms based on the value used in the set
options command.
ON test port UUCSSpp l r 3
2049(h) 32770 None
2049(i) 40967 None
