DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-184reset port-network
8
Parameters
Examples
reset port-network 10 level 2
Output
For more information, see ‘‘Common Output Fields’’ and ‘‘Common Abort and Fail
Codes’’ at the beginning of this chapter. The following display shows a typical
result when
reset port-network 4 lev 1
is entered.
PN#
Port network number
Use
list cabinet
to find the PN number(s) associated with a given
cabinet.
level 1 | 2
Reset level 1 (WARM restart) is used to restart an EPN that is still fully or
partially in service. All stable calls are preserved, and full service is
restored within 35 seconds.
Reset level 2 (COLD restart) results in reset, removal, and reinsertion of
all EPN circuit packs. It is used to recover an EPN that has been taken
out of service. Level 2 restarts should take less than 2 minutes. All calls
and application links with an endpoint in the EPN are dropped. If two
level 2 resets within an hour fail to return the EPN to service, EPN
Emergency Transfer is invoked. (EPN Emergency Transfer will already
be in effect if the link to the EPN has been down for more than 1
minute).
Port
The PN number of the reset EPN.
reset port-network 4 level 1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
04 EXP-PN 956 PASS
Command Successfully Completed
