
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-235status conference
8
FPS
The CIF frame rate (frames per second) -
‘-‘, 30, 15, 10, 7.5
. FPS
indicates the rate that an endpoint is capable of receiving frames. Note
that there is no indication of the maximum transmit frame rate nor the
current frame rate that the MCU can detect. The frame rate changes as
a function of the amount of motion in the input image.
QFPS
The ACIF frame rate (frames per second) - ‘
-
‘,
30
,
15
,
10
,
7.5
. QFPS
indicates the rate that an endpoint is capable of generating/receiving
frames.
For quad-screen VAS conferences, QFPS reflects the highest common
QCIF frame rate of all endpoints and the rate of the video mixer board,
which may be lower than the rest of the participants. Note that QCIF
calculation takes into account the highest common CIF frame rate
declared by all conference participants, since QCIF rate cannot be
greater than that of the highest common CIF rate.
For quad-screen presentation conferences, QFPS reflects the highest
common QCIF frame rate of all participants and the rate of the video
mixer board. Note that the QFPS cannot be greater than the CIF frame
rate announced by the presenter.
QFPS field is
blank
for proprietary modes.
lo/hi
interworking
Does this conference support Low Speed/High Speed Interworking? -
This field will always have a value of
n
.
Type
The type of conferee, either Audio/Video (
P64
), Audio Add-on (
AUD
),
Cascade Link (
CAS
), BONDing Call (
BOND
), BONDing Cascade Link
(
BCAS
), UCC Controller (
UCC
), or Dedicated Access (
DA
). BONDing
calls use up to 12 channels to form a single multimedia pipe.
Ext
Endpoint extension chosen at administration. This field is blank.
Meet-me
number
The Meet-Me Number administered for the Meet-Me Extension. This
field is blank.
Dial Type
Indicates whether dial-in or dial-out is used to join the endpoint to the
conference -
in
,
out
. The value
in
is for dial-in, and
out
is for dial-out.