DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-306status station
8
Output
The following display shows a typical result when
status sp-link
is entered.
status station
status station extension [print]
The status station command displays internal software state information for
diagnosis. This command can help locate facilities to which the station is
communicating.
Output
Link State:
The operational state of the link:
up
A call is currently set up to the system printer.
down
The link is administered but a call is not currently set up to the
printer.
extension not administered
An extension has not been
administered for the system printer on the features-related system
parameters form.
Number of
Retries:
The number of times the switch has tried to establish the link since a
request to set it up has been received. This field is displayed only when
the link is down. The maximum value displayed is 999.
Maintenance
Busy?
Whether maintenance testing is being performed on the system printer
link. A blank is displayed if the system printer link is not administered.
Type The type of equipment administered for the extension.
Extension The extension number specified on the command line.
Port The location of the port assigned to the station.
Call Park Whether the station has a call parked.
status sp-link SPE A
SYSTEM PRINTER LINK STATUS
Link State: down
Number of Retries: 0
Maintenance Busy? no
