DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-347test inads-link
8
inads-link
command. The field can be changed by executing a
change
permission login
command.
There will be no alarms raised on the system as a result of the “test inads-link”
command. Attendant alarm and acknowledgment lamp states will not be
changed as a result of the command. The test will not be run during periodic or
scheduled maintenance.
Defaults
The test will default to test the link to the first OSS telephone number.
Parameter
Help Messages
If the system technician presses HELP after entering test
inads-link
the following
message will be displayed:
[‘1’ or ‘2’]
Or press CANCEL to cancel the command
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
If the test passed then the following message will be displayed:
Command successfully completed
1
This option will cause testing of the link to the first OSS telephone number.
2
This option will cause testing of the link to the second OSS telephone number.
