DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-218status administered-connection
8
Output
Connection
Number:
The number assigned to the administered connection.
Enabled?
Whether the administered connection is enabled.
Originator:
The extension of the access or data endpoint that originates the
connection.
Destination:
The destination address used to route the administered connection.
Connection
State:
The current status of the administered connection as follows:
connected
= A connection between the originating and destination
endpoints is currently active.
restored
= The connection has been restored. The session may or may
not have been preserved.
failed
= The connection failed due to either an administrative error
such as a wrong number or a service-blocking condition such as barring
of outgoing calls.
Recovering from such a failure requires manual intervention. No further
attempt is made by the system to re-establish the administered
connection until the
change administered- connection
command is
executed. If the failure was caused by a transient condition, you may be
able to re-establish the connection by first disabling and then enabling
the connection via the “Enable?” field on the
change administered
connection
form. (The
enable admin
and
disable admin
commands
affect only maintenance processes).
