DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-257status conference
8
Page 3 - Conference Information
This section only describes the fields that are specific to the endpoint-level
command output.
Screen 8-9. Page 3 of 6: status conference x endpoint y
Conference Info. This information applies mostly to full-screen conferences. The
Broadcaster field also applies to quad-screen presentation mode
conferences.
Ports Aud
If the endpoint type is not “UCC,” the VC audio encoder port (which is
always paired to a decoder port) for the channel (only the first
channel). Because only one audio encoder port is allocated per
endpoint, it appears together with the ESM data port in the endpoint’s
channel 1 port slot position of the Port Aud/ESM column. For “UCC”
endpoint type, the channel 1 port slot position displays the allocated
Call Classifier resource.
Ports ESM
The Expansion Service Module MMI data port. This field is always
blank.
Ports BONDng
The MMI port used for BONDing for the channel.
Fr Err
Frame error counter. A circular hex counter (0-FF) to indicate the
occurrence of framing errors.
status conference endpoint page 3 of 6
CONFERENCE INFO: Broadcaster: xx (See-Me)
Return Vid: xx
---------- MODE COMMANDS/COMMUNICATION MODES ------| EPT MISC | ------- FAW --
CMD STAT CONF EPT-IN EPT-OUT |------ I O | CH1 CH2
----- ---- ------------ ------------- -------------| AIM: y n | --- ---
XRATE: y 384 384 384 | VIS y n | A-OUT: y n
AUDIO: n G728 neutral G728 | MIS: n | A-IN: y n
56/64: y derestrict derestrict derestrict | MCV: n | M-FRM: y n
VIDEO: n H.261 H.261 H.261 |-------------| MFA: y n
MLP: y MLP-off MLP-off MLP-off | TALK: y 05 | MFN: y n
H-MLP: y H-MLP-off H-MLP-off H-MLP-off | VFCV: y 01 | FAS: y n
LSD: y LSD-off LSD-off LSD-off | BCTK: n 02 |MCUFAL: 00 00
HSD: y HSD-off HSD-off HSD-off | RTTK: y 01 | FEFAL: 00 00
CRYPT: y encrypt-off encrypt-off encrypt-off | BCLS: n |
S/M: y N-comp-6B-H0 N-comp-6B-H0 N-comp-6B-H0 | RTLS: n |
| HYPR: n 00 |
|DMUTE: n 00 |
|H.261: n 00 |
| VFMT: n 00 |
Help line
enter command:
