DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-51change fiber-link
8
change fiber-link
change fiber-link fiber#
The
change fiber-link
command changes the translation data associated with
an existing fiber link. On critical reliability systems (duplicated PNC), each fiber
link is duplicated and exists as a pair. When PNC duplication is enabled, only the
fields on pages 2 and 3 (the DS1 CONV complex attributes) can be changed.
Translation data is not changed until the
Enter key is pressed. Pressing CANCEL
any time before pressing
Enter to enter the changes returns you to the command
line without changing any translation data.
When you enter a command that changes translation data, two checks are made:
■ You must have permission to administer the feature.
■ No other user may be executing a
change, add
, or
remove fiber-link
command.
On a simplex PNC or fully operational duplex PNC, you must remove a fiber and
add it again to change the endpoint board locations.
Parameters
Examples
change fiber-link 21
number The administered number (1-27) associated with a fiber link or, on a
duplicated PNC, with a fiber link pair.
