DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-153mark port
8
The following display shows a typical result when
list sys-link
is entered on a
system with 5 PNs and PNC duplication.
mark port
mark port UUCSSpp
The
mark port
command will identify a port as unusable by normal call
processing. The port will be able to be tested, etc. but calls will not be attempted
through the port. The marking of a port is saved as part of translation. The port
can be restored to service by using the clear port command.
For more information see ‘‘Common Input Parameters’’
and ‘‘Common Output
Fields’’ at the beginning of this chapter.
monitor bcms
monitor bcms split split# | system system# | skill skill#
The monitor bcms command displays output for agents and splits summarizing
the Basic Call Management System (BCMS) condition. This on-line status report
is automatically updated every 30 seconds or on demand by pressing
UPDATE.
The command is canceled by pressing
CANCEL which results in termination of the
login. Three display options are available: split, system and skill.
list sys-link Page 1 SPE A
SYSTEM LINKS INFORMATION
Location Link Type/ State Current Faulted Last Fault
Channel Path Path Recorded
02A0101 EAL up present present 12/30/1991 14:18
02B0201 EAL up present none
03A0101 EAL up present present 12/30/1991 12:56
03B0201 EAL up present none
04A0101 EAL up present present 12/30/1991 14:18
04B0201 EAL up present none
05A0101 EAL up present present 12/30/1991 12:56
05B0201 EAL up present none
01E0201 LNL up present none
01D0201 LNL up present none
01E2001 RNL up present none
02E0201 RNL up present present 12/30/1991 14:18
02E0301 RNL up present present 12/30/1991 14:18
02E2001 RNL up present none
press CANCEL to quit -- press NEXT PAGE to continue
