DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1201PGATE-BD (Packet Gateway Circuit Pack)
9
Table 9-477. TEST #52 Control Channel Loop-Around Test
Error
Code
Tes t
Result Description/ Recommendation
None
2100
ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
FAIL The circuit pack failed to return the circuit pack code or vintage.
1. Retry the command a few times for a maximum of 5 times.
2. If the problem continues to fail, and if the circuit pack is one of the Port
circuit packs, reseat the circuit pack. Otherwise, if the circuit pack is one
of the Processor Complex circuit packs, see
Replacing SPE Circuit Packs
in Chapter 5, ‘‘Alarms, Errors, and Troubleshooting’’
for how to pull out
and reinsert the circuit pack.
3. Retry the command a few times for a maximum of 5 times.
4. If the problem continues to fail, and if the circuit pack is one of the Port
Circuit Packs, replace the circuit pack. Otherwise, if the circuit pack is
one of the Processor Complex Circuit Packs, see
Replacing SPE Circuit
Packs
in Chapter 5, ‘‘Alarms, Errors, and Troubleshooting’’ for how to
replace the circuit pack.
5. Retry the command a few times for a maximum of 5 times.
PASS Communication with this circuit pack is successful.
