DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1523STO-DATA (Stored Data)
9
b. Error types 257 and 769 indicate that the vintages of the boot images on
the two storage devices on Carrier A or Carrier B respectively, are
inconsistent.
1. Use the
list configuration software-vintage
command to get the
vintage numbers and install the correct vintage.
2. Run the data storage tests by entering
test stored-data
to retire the
alarm.
3. If the STORED-DATA tests fail, refer to the repair procedures for
those tests for further information.
c. Error type 542 indicates that the scheduled daily save-translation
operation failed. If a STORED-DATA alarm is active, it is due to a data
inconsistency.
1. Refer to the alarm log and clear any failures associated with the
HOST ADAPTER, TAPE, or DUPINT circuit and clear those
problems first.
2. Then save translation manually by entering
save translation
and
backup the disk manually by entering
backup disk
. Note: this
operation may take up to an hour.
3. Run the data storage tests by entering
test stored-data
to retire the
alarm.
4. If the STORED-DATA tests fail, refer to the repair procedures for
those tests for further information.
d. Error type 543 indicates that the scheduled daily disk backup operation
failed. If a STORED-DATA alarm is active, it is due to a data inconsistency.
1. Refer to the alarm log and clear any failures associated with the
HOST ADAPTER, DISK, or DUPINT circuit and clear those
problems first.
2. Then backup translation manually by entering
backup disk
. Note:
this operation may take up to an hour.
3. Run the data storage tests by entering
test stored-data
to retire the
alarm.
4. If the STORED-DATA tests fail, refer to the repair procedures for
those tests for further information.
e. Error types 1025 and 1537 indicate that one or more of the following
conditions has occurred between the tapes or between the disks
respectively, in each carrier: the timestamps of the translation files on the
two storage devices are inconsistent, the timestamps of the
announcement files on the two storage devices are inconsistent, or the
timestamps of the program update files on the two storage devices are
inconsistent.
