DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-119format card-mem
8
Examples
enable test-number 102
This command will re-enable a specified test that was previously turned off with
the
disable test
command. (The
disable test
command is not available to the
craft login.) While disabled a test cannot be run by background or demand
maintenance. Before enabling a test, ascertain why it was disabled, and inform
INADS that it has been turned back on.
Parameters
format card-mem
This command formats the active and standby processor Flash Read-Only
Memory.
Synopsis
format card-mem [translation] [announcements] [coredump]
Permissions
The following default logins may execute this command: browse, system
technician, cust, inads, init.
Examples
format card-mem translation
format card-mem announcements
format card-mem coredump
Description
The maintenance command, “format card-mem translation” will erase and format
the memory card for translations only. The maintenance command format
card-mem announcement will erase and format the memory card for
translations and announcements. The maintenance command format card-mem
coredump will erase and format the memory card for translations,
announcements and coredump.
test#
The number of the test to be re-enabled
Descriptions of each test appear under the relevant MO in Chapter 9. See the
Index for a numerical list of all demand maintenance tests.
