DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Alarms, Errors, and Troubleshooting
5-54ATM Tips
5
■ The
pp UBR
virtual circuits between A500 ports
A1.1
(PPN) and
Self
(A500) and between
A1.2
(EPN) and
Self
(A500) are ATM signaling
channels between the port network and the A500.
■ They are used to request connection setups and releases to other end
points such as another port network.
■ These are established by each TN230X when it comes up, independent of
DEFINITY Call Processing.
■ Other UBR virtual circuits may exist between A500 ports that are not
associated with DEFINITY port networks and may be signaling channels
for other applications (for example, data network traffic).
CaPro Layer
Are control channels being established from the PPN to the EPN?
Diagnostics
■ Do you get a dial tone on a set on the port network in question?
■ Can you ring a set on the EPN dialing from the PPN and vice versa?
1. Enter
list sys-link
on the DEFINITY SAT. Figure 5-34
shows the screen
output.
Figure 5-34. List sys-link screen
Ensure that the fields have the values indicated below.
Link Type/
Channel
One PACL to each TN230X in either a PPN or an EPN, and
one EAL to each TN230X in an EPN.
State up
list sys-link
SYSTEM LINKS INFORMATION
Location Link Type/ State Current Faulted Last Fault
Channel Path Path Recorded
02A0101 EAL up present present 12/06/1997 16:20
01B0202 PACL up present present 12/06/1997 16:17
02A0102 PACL up present present 12/06/1997 16:20
