DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1340PRI-CDR/SEC-CDR (Call Detail Recording Link)
9
Link Retry Test (#215)
This test sends a message to the CDR software process to make a data call to
the extension where the CDR output device connects to. If the CDR link is
already up, then this test will be passed without making any data call.
1010 ABORT The CDR link has been busied out to out-of-service.
1. Enter the release cdr primary|secondary command to release the
CDR link from busyout state.
2. Retry the test cdr primary|secondary long command to execute the
test.
2012 ABORT Internal system error.
1. Retry the command at one-minute intervals a maximum of 5 times.
FAIL Internal system error.
1. Retry the command at one-minute intervals for a maximum of 5 times.
PASS The CDR link is torn down.
Table 9-525. TEST #215 Link Retry Test
Error
Code
Te s t
Result Description/ Recommendation
10 ABORT Internal system error.
20 ABORT Internal system error.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
30 ABORT Internal system error.
1. Refer to ‘‘Procedures for Restoring the CDR Link’’ for instructions.
1010 ABORT The CDR link has been busied out to out-of-service.
1. Enter release cdr primary|secondary command to release the CDR
link from busyout state.
2. Retry test cdr primary|secondary long command to execute the
test.
Continued on next page
Table 9-524. TEST #213 Link Tear Down Test
Error
Code
Te s t
Result Description/ Recommendation
Continued on next page
