DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-114ANN-PT (Announcement Port)
9
Error Log Entries and Test to Clear Values
Notes:
a. This error type indicates that the circuit pack has been removed or has
been insane for more than 11-minutes. To clear the error, reinsert or
replace the circuit pack.
b. This error is logged and the port is alarmed when an alarm is raised on the
announcement circuit pack because of a faulty condition with a common
circuit pack resource. Any one of the following alarmed errors on the
announcement circuit pack causes this error to be logged against the
Announcement Port: 1793, 2049, 2305, 2561. See ‘‘ANN-BD
(Announcement Circuit Pack)’’ to resolve these alarms. When the
corresponding circuit pack alarm is cleared, this alarm will clear.
Table 9-44. Announcement Port Error Log Entries
Error
Type
Aux
Data Associated Test Alarm Level
On/Off
Board Test to Clear Value
0
1
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the appropriate
test description and follow the recommended procedures.
0 Any Any Any test port UUCSSpp sh r 1
1 Playback Speech
Memory Array
(PSMA) Test (#206)
MINOR ON test port UUCSSpp sh r 3
18 0 The port was busied
out.
WARNING OFF release port UUCSSpp
130(a) None WARNING ON test port UUCSSpp sh
257 Channel
Administration
Memory Array
(CAMA) Test (#205)
MINOR ON test port UUCSSpp l r 3
17667 In-line error
513 140AY Channel
Sanity Inquiry Test
(#222)
MINOR ON test port UUCSSpp sh r 3
17684 In-line error
769(b) None
