DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1246PKT-INT (Packet Interface Circuit Pack)
9
will operate in any one of the three slots provided. If more than one Packet
Interface circuit pack is inserted, an alarm will be generated. For a system
equipped with duplicated SPEs, the slot used for the Packet Interface circuit
pack on the standby SPE must be the same slot position as that used on the
active SPE or an alarm will be generated against the Packet Interface circuit
pack in the standby SPE.
Figure 9-79. Packet Interface Connectivity
Packet Interface Service Operations
The following sections provides more background information about Packet
Interface service operations.
.
.
.
.
.
.
.
.
.
.
.
TDM Bus
Packet Bus
SPE Complex
PKT
INT
TN1655
PKT
INT
TN1655
System
Ports
To EPN
Connectivity
.
.
.
.
.
.
.
.
.
.
.
DATA
LINE
BD
PDATA
BD
EXP
INTF
Optional
Duplicated
Processor Bus
Other SPE
Components
Other SPE
Components
SPE Complex
Processor Bus
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
