DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-55change system-parameters maintenance
8
Field descriptions
NOTE:
Port Networks can only get synchronization from the ATM switch. Entering a
circuit pack location only monitors that pack for errors.
change system-parameters
maintenance
change system-parameters maintenance
The maintenance-related system parameters form specifies and displays
scheduled maintenance operations and maintenance support functions.
This form activates and deactivates INADS alarm origination when performing
repairs. To deactivate alarm origination:
1. Make a note of the current entries in the Alarm Origination and CPE fields
so you can restore them when you are done.
2. Change the Alarm Origination to OSS Numbers field “neither.”
3. Change the CPE Alarm Activation Level field to “none.”
Primary
Enter
ATM-SW
or 5-character board location
Secondary
16-character alpha-numeric characters for identification
change synchronization Page 1 of 6 SPE A
SYNCHRONIZATION PLAN
ATM SYNCHRONIZATION REFERENCE (circuit pack location)
Stratum: 4
Primary: ATM-SW
Secondary: ATM-SW
Location Name Slip Location Name Slip
44C20 uds1-tg12&13 n 03B20 uds1-tg23 n
44B20 uds1-tg18 n 03D20 uds1-tg23 n
44C18 DCS+ -> ST12 n 04E20 uds1-tg23 n
44C19 QSIG -> ST12 n 05D20 uds1-tg23 n
07D20 DCS+ -> ST11 n 06B20 uds1-tg23 n
02A19 QSIG -> ST11 n 04C20 uds1-tg22 n
07E19 uds1-tg8&9 n 05A19 uds1-tg22 n
02E20 uds1-tg23 n 06D20 uds1-tg21 n
NOTE: DS1 and BRI TRUNK sources result in stratum 4, type II synchronization
