DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-226status bri-port
8
Interpreting Results of BRI-Port Status Reports
Table 8-10 will help to interpret results of the
status bri-port
command. Find the
combination of output field values contained in your report and follow the
recommendations for the type of endpoint connected to the portStatus Cabinet
status cabinet
UU [print]
This command displays the operational status and attributes of the specified
cabinet. The output screen displays configuration information for each carrier,
connectivity and alarm information for each port network or switch node, and the
emergency transfer status of the cabinet.
The cabinet number defaults to 1.
Output
Carrier Location The cabinet number and carrier letter of each carrier in the cabinet.
PN/SN Number
The Port Network number (1-22) or Switch Node number (1 or 2) of the
indicated carrier.
Carrier Type The type of the indicated carrier: processor, port, expansion-control,
switch-node, dup-sw-node or not-used.
Cabinet Type One of the following types:
MCC Multicarrier cabinet
SCC Single carrier cabinet
S75XE System 75 (pre-R1V4) single carrier XE cabinet
blank The cabinet type could not be determined.
status bri-port 1c1701 Page 1 of 1 SPE A
STATUS BRI-PORT
Port: 01C1701
Service State: in-service
Maintenance Busy?: no
Layer 1 State: activated
TEI Value Layer2 State Endpt Extension Endpt SPID Service SPID?
Link1 64 13-established 1010 1010
Link2
Link3
