DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-48change circuit packs
8
Parameters
Output
An input form is displayed containing the following fields:
The following display shows a typical result when
change circuit-packs 1
is
entered on a system with simplex SPE and a Center Stage Switch (cabinet 1 is
always 5-carrier).
UU The number of the cabinet containing the circuit packs to be modified. Default is 1.
Cabinet
The administered number of the cabinet (1-22).
Cabinet
Layout
Type of cabinet.
Carrier
Each page of this form reports the information for 1 carrier. This field
indicates the letter designation of the carrier displayed on the current
page.
Carrier
Type
The function of the carrier: (port, processor, switch-node,
dup-switch-node, or not-used).
Slot
The carrier slot numbers (00 - 21).
Code
The TN or UN part number of the circuit pack. This number identifies
the circuit pack type to system software.
Sfx
The letter suffix of the circuit pack, if applicable.
Name
The name of the circuit pack. This field aids in entering the circuit pack
codes.
change circuit-packs 1 Page 1 of 5
CIRCUIT PACKS
Cabinet: 1 Carrier: A
Cabinet Layout: five-carrier Carrier Type: processor
*** PROCESSOR BOARDS NOT ADMINISTERABLE IN THIS SCREEN ***
