DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1798TONE-PT (Tone Generator)
9
Error Log Entries and Test to Clear Values
Notes:
a. A failure in the tone generation facility on the indicated circuit pack has
been detected. Replace the circuit pack. See
How to Replace the
Tone-Clock Circuit Pack
in the TONE-BD section.
b. The indicated Tone-Clock circuit pack has been made unavailable via the
busyout tone-clock UUC command. It only applies to systems which
have the High or Critical Reliability Option administered, because only a
standby Tone-Clock circuit pack may be made busy by that command. To
resolve this error, execute the release tone-clock UUC command for the
alarmed circuit pack.
c. This error type indicates that the circuit pack has been removed or has
been insane for more than 11-minutes. To clear the error, reinsert or
replace the circuit pack.
Table 9-671. Tone Generator Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
0
1
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.
0 Any Any Any test tone-clock UUC r 1
1(a) 17664 Tone Generator Audit/ MAJOR/ ON test tone-clock UUC r 2
Update Test (#41) MINOR
2
2. MAJOR alarm if the alarmed Tone-Clock circuit pack is not duplicated; MINOR if it duplicated within
the same Port Network.
18(b) 0 busyout tone-clock
UUC
WARNING OFF release tone-clock UUC
130(c) None MINOR ON test tone-clock UUC Sh
257(d,f) 17667 None MINOR ON
513(e,f) 17666 Tone Generator Audit/
Update Test (#41)
MINOR ON test tone-clock UUC r 3
769 Any Transmission Test
(#40)
MAJOR/
MINOR
2
ON test tone-clock UUC r 3
1025 Crosstalk Test (#90) MAJOR/
MINOR
2
ON test tone-clock UUC l r 2
1281(g) Any Tone Generator Audit/
Update Test (#41)
MINOR ON test tone-clock UUC r 3
