DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-46cancel hardware-group
8
The status of a canceled test hardware-group command will show up as
“canceled” on the “status hardware-group” screen.
When a hardware-group test is executing in the foreground with the
“continuously” option and
CANCEL is pressed or the cancel hardware-group is
entered, then the hardware-group test is canceled and for security reasons, the
MT running the hardware-group test will be logged off. However, after logging
back on the system, you can still restart the canceled hardware-group test
command with resume hardware-group command.
Scheduled and Periodic Maintenance
When a
test hardware-group
is entered, all activity related to scheduled
background maintenance, periodic background maintenance, and data audits is
suspended for the duration of the execution of the
test hardware-group
command. All activity related to scheduled background maintenance, periodic
background maintenance, and data audits will restart if the “test
hardware-group” command is canceled.
Status Hardware-Group
The state of a canceled
test hardware-group
command is displayed by the
test
hardware-group
command and the state shows up as canceled.
All Ports Option
When
test hardware-group all-ports
is canceled, the internally generated port
translations for ports that are otherwise untranslated are removed. If
resume
hardware-group
is then entered, only customer-administered ports will
subsequently be tested.
resume
does
not
reinstate the port translations that
were removed by the
cancel
.
Output
If a
test hardware-group
command started in the background is successfully
canceled with
cancel hardware-group
, this response is displayed:
Hardware-group command successfully canceled
If a test hardware-group command executing in the foreground is successfully
canceled with a cancel hardware-group command from another terminal, the
following response will be displayed on the terminal where the hardware-group
command was executing:
Hardware-group command aborted with cancel
command entered from another terminal
