DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-273status hardware-group
8
Output
Hardware
Group
Command
State:
The state of a hardware-group command: active: testing is in progress;
canceled: testing has been canceled; complete the command has
completed and there is no testing going on.
Number of
MOs Tested:
The number of MOs in the specified group (refer to test
hardware-group command) that have had been tested by the current
hardware-group command. This includes all MOs that were either
actually tested or were aborted due to resource contention.
Total
Number of
MOs to be
Tested:
The total number of MOs in the group that was specified in the "test
hardware-group" command.
Percent
Complete:
A ratio of the number of MOs completed and the total number of MOs
to test in the command.
Elapsed
Test Time:
The duration of the hardware-group test. If a test was canceled and
then restarted this time excludes the cancel period. If the
hardware-group command has finished it will indicate the length of
time it took to complete the command. The time is displayed in the
HH:MM:SS format where HH is hours, MM is minutes, and SS is
seconds.
Repetition
Number
The number of iterations that have been completed corresponding to
the ‘repeat’ or the ‘continuously’ option.
Percentage
of Tests
Passed:
The percentage of tests that passed.
Percentage
of Tests
Failed:
The percentage of tests that failed.
Percentage
of Tests
Aborted:
The percentage of tests that were aborted.
Command: The hardware-group action object and qualifiers that were entered.
Test
sequence:
This will display either short or long.
Test
repetition:
This will display either continuously or the keyword repeat along with
the repeat value entered.
Output
options:
This will display the selections that were chosen on the input form:
auto-page, background, or failures.
Hardware
options:
This will display the selections that were chosen on the input form,
(all-ports or SPE-interchange).
