DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126
Issue 4
June 1999
Alarms, Errors, and Troubleshooting
5-53ATM Tips
5
ATM Call Control
Are ATM signaling connections being setup to A500 Call Control?
1. Enter
show switch circuittable
on the A500 console. Figure 5-33
shows
the screen output.
Figure 5-33. A500: show switch circuittable screen
Table 5-7. Observed Cause Codes
Cause
Code Definition Observed Cause
3 No route to destination The ATM addresses administered in the ATM switch
(show signaling routes or show signaling esi) or in
DEFINITY (display atm pnc) are incorrect.
31 Normal, unspecified This is a normal return.
41 Temporary failure This "try again later" Cause Code has been observed
when the source of the problem is on another port (for
example, a routing problem on another port that
displays Cause Code 3).
47 Resources unavailable,
unspecified
DEFINITY call volume is too high for the available
resources in the ATM network.
63 Service or option unavailable,
unspecified
DEFINITY call volume is too high for the available
resources in the ATM network.
A500:show switch circuittable
_______________________________________________________
| Input | Output | Connection |
| port vpi vci| port vpi vci| type class parameters |
|______________|______________|_________________________|
A1.1 0 5 Self 0 1 pp UBR ppd on
A1.1 0 32 A1.2 0 32 pp VBRnrt pcr=5729 /scr=5729 /mbs=17187
A1.1 0 35 A1.2 0 35 pmp CBR pcr=173
A1.2 0 5 Self 0 2 pp UBR ppd on
A1.2 0 32 A1.1 0 32 pp VBRnrt pcr=5729 /scr=5729 /mbs=17187
A1.2 0 34 A1.1 0 34 pmp CBR pcr=173
Self 0 1 A1.1 0 5 pp UBR ppd on
Self 0 2 A1.2 0 5 pp UBR ppd on
_________________________________________________________
