A SERVICE OF

logo

Configuring the Printer for the Network
48
3
Macintosh Configuration
Configuring Macintosh
This section describes how to configure a Macintosh computer to use EtherTalk.
The actual procedures to configure a Macintosh are slightly different depending
on the version of the Mac OS. If you are not using Mac OS 8, see the manual that
comes with your version of the Mac OS for more information.
Reference
For information on configuring a network printer in a Macintosh EtherTalk
environment, see “PostScript 3 Operating Instructions Supplement” included
in the CD-ROM labeled “Printer Drivers and Utilities”.
Changing to EtherTalk
Reference
For information on installing the software required for EtherTalk, see the
Macintosh manuals.
A
Open
[
Control Panels
]
, and double-click the
[
AppleTalk
]
icon.
B
Select
[
Ethernet
]
from the
[
Connect via:
]
pop-up menu.
C
If you change zones, select a name from the
[
Current zone:
]
pop-up menu.
D
Close the
[
AppleTalk
]
control panels.
E
Restart the Macintosh.