Configuring the Printer for the Network
42
3
Setting Up as Print Server
Important
❒
You can set up the print server using the NDS or Bindery mode in NetWare
4.x. The following procedure is for setting up the print server using the NDS
mode in NetWare 4.1. When you set up the print server using the Bindery
mode, use the NIB Setup Tool Wizard. ⇒ P.36 “Quick Setup Using the NIB Set-
up Tool Wizard”.
A
Log in to the file server as an Admin or an Admin equivalent.
B
Run the NIB Setup Tool.
Reference
⇒ P.25 “Running the NIB Setup Tool”
C
Click
[
Property Sheet
]
and click
[
OK
]
.
The
[
Browse
]
dialog box of the Network Interface Board appears.
D
Click
[
IPX protocol
]
.
E
Select the IPX address of the Network Interface Board which is to be con-
figured by clicking it, and click
[
Next >
]
.
Note
❒
If you do not know which Network Interface Board you are configuring,
see the network configuration page to confirm the MAC address (Network
Address).
F
Confirm that the MAC address and IPX address are correct, and click
[
Fin-
ish
]
.
The
[
NIB Setup Tool
]
window appears.
G
Click
[
Configure
]
.
The property sheet appears.
H
Click the
[
General
]
tab, and type the name of the print server into the
[
Device
Name
]
box.
I
Click the
[
NetWare
]
tab, and make the following settings.
A
Select
[
NDS
]
.
