Configuring the Printer for the Network
46
3
When Using the PostScript Printer Driver
Follow these steps to set up for the PostScript Printer Driver
A
Click the
[
PostScript
]
tab.
B
Click
[
Advanced
]
.
C
Remove the check marks from the
[
Send CTRL+D before job
]
and the
[
Send
CTRL+D after job
]
check boxes.
M
Click
[
OK
]
to close the property.
Windows 3.1x
Follow these steps to set up a Windows 3.1x client.
Note
❒
This section assumes that the client software released from Novell is installed
on the client computer.
A
Install the printer driver of the printer you want to use as “Local printer”.
Reference
For more information on installing the printer driver, see P.51 “Installing
the PCL 6/5e Printer Driver” and P.59 “Installing the PostScript Printer Driv-
er”.
B
Double-click the
[
Printers
]
icon on
[
Control Panel
]
.
C
In the
[
Installed Printers
]
box, select the printer driver you want to use by
clicking it, and then, click
[
Connect
]
.
D
In the
[
Ports
]
box, click “LPT1” to highlight it, and click
[
Network
]
.
The
[
NetWare Printer Connections
]
dialog box appears.
E
In the
[
Ports
]
box, click “LPT1” to highlight it, and in the
[
Resources
]
box,
click the queue you want to print to highlight it.
Note
❒
You should log in to the file server in order to see the print queues.
F
Click
[
Capture
]
.
The specified queue is captured to the LPT1.
G
Click
[
LPT Settings
]
.
The
[
NetWare Settings
]
dialog box appears.
