Configuring the Printer for the Network
36
3
NetWare Configuration
Quick Setup Using the NIB Setup Tool Wizard
Using the NIB Setup Tool, you can easily set up a NetWare printing environ-
ment.
Reference
For more information on setting up the NIB Setup Tool, see P.24 “Installing the
NIB Setup Tool”.
You can select
[
Wizard
]
or
[
Property Sheet
]
as an installation method.
When you configure the Network Interface Board for the first time, use the Wiz-
ard method.
If you want to use the Property Sheet method, see P.38 “NetWare 3.x - Advanced
Settings” and P.41 “NetWare 4.x - Advanced Settings”.
Note
❒
This section assumes that NetWare is functional and that the necessary envi-
ronment for the NetWare Print Services is available.
❒
If you configure the Network Interface Board in a NetWare environment us-
ing the NIB Setup Tool, you should install the client software released from
Novell in the following cases.
• Windows 95/98 in NDS mode configuration
• Windows NT 4.0 in NDS mode configuration
• Windows NT 4.0 in Bindary mode configuration
A
Log in to the Netware file server or the NDS tree as an Admin or Admin
equivalent.
B
Run the NIB Setup Tool.
Reference
⇒ P.25 “Running the NIB Setup Tool”
C
Click
[
Wizard
]
and click
[
OK
]
.
The
[
Network board list
]
dialog box of the Network Interface Board appears.
D
Click
[
IPX protocol
]
.
E
Select the IPX address of the Network Interface Board you are configuring
by clicking it, and click
[
Next >
]
.
Note
❒
If you don't know which Network Interface Board you are configuring,
print a network configuration page to confirm the MAC address (Network
address).
