NetWare Configuration
45
3
Windows 95/98
Follow these steps to set up a Windows 95/98 client.
Preparation
Log in to the NetWare file server before starting the following procedure.
A
Install the printer driver of the printer you want to use as “Local printer”.
Reference
For more information on installing the printer driver, see P.51 “Installing
the PCL 6/5e Printer Driver” and P.59 “Installing the PostScript Printer Driv-
er”.
Note
❒
Any port is selected during the installation, however, LPT1 is recommend-
ed.
B
Click
[
Start
]
, point to
[
Settings
]
, and then click
[
Printers
]
.
C
In the
[
Printers
]
window, click the icon of the printer you want to use.
D
On the
[
File
]
menu, click
[
Properties
]
.
E
Click the
[
Details
]
tab, and click
[
Add Port
]
.
F
Click
[
Network
]
and click
[
Browse
]
.
G
On the network tree, double-click the name of the file server.
The queues are displayed.
H
Click the queue you want to print to highlight it, and click
[
OK
]
.
I
Click
[
OK
]
.
In the
[
Print to the following port
]
box, a network path to the printer appears.
J
Click
[
OK
]
to close the printer's property, and again, open it.
K
Click the
[
Printer Settings
]
tab.
L
Remove the check marks from the
[
Form feed
]
and the
[
Enable banner
]
check
boxes.
Note
❒
You should not check these boxes, because they should be specified using
the printer driver. If they are checked, the printer might not print correctly.
