85
8. Paper and Other Media
Paper and Other Media Supported by
Your Printer
Paper Types and Sizes
This section describes the type, size, feed direction, and maximum capacity of
paper that can be loaded into each paper tray in this printer.
Important
❒
Be sure to set the paper size dial to match the actual paper size loaded in the
tray. When the actual paper size is not shown on the dial, set the dial to “
p
”
and specify the paper size using the operation panel.
Note
❒
The meaning of the symbols describing paper can be seen in the following ta-
ble.
❒
It is recommended that you load paper having the size and direction you fre-
quently use in the tray selected with the “Tray Priority”. For details on Tray
Priority, see P.134 “Job Control Parameters”.
❒
When loading paper having the same size in more than one tray, it is recom-
mended that you load paper in the same direction.
❒
Regarding the meanings of the abbreviations, see the notes following each ta-
ble.
In this manual Meaning
K
long-edge feed direction
L
short-edge feed direction
