Setting Up the IP Parameters
21
3
❒
If you press
{
Escape
}
when Byte
1 is on the panel display, the
new IP address is canceled and
you return to the previous panel
display.
J
Repeat steps
H
and
I
to set the rest
of the IP address.
After setting Byte 4, the new IP Ad-
dress is displayed on the panel dis-
play for 2 seconds.
IP Address:
192.168. 15. 16
The panel display returns to the
previous menu automatically.
The following message appears on
the panel display.
Network Setup:
IP Address
K
Press
{T}
or
{U}
until the follow-
ing message appears.
Network Setup:
Subnet Mask
L
Press
{
Enter
}
.
Byte 1 of the current subnet mask
appears on the panel display.
Subnet Mask:
Byte 1=0
M
Set the subnet mask using the
same procedure used to set the IP
address.
After setting Byte 4, the new sub-
net mask is displayed on the panel
display for 2 seconds.
Subnet Mask:
255.255.255. 0
The panel display returns to the
previous menu automatically.
The following message appears on
the panel display.
Network Setup:
Subnet Mask
N
Press
{T}
or
{U}
until the follow-
ing message appears.
Network Setup:
Gateway Address
O
Press
{
Enter
}
.
Byte 1 of the current gateway ad-
dress is displayed on the panel dis-
play.
Gateway Address
Byte 1=0
P
Set the gateway address using the
same procedure used to set the IP
address.
Q
Press
{
On Line
}
.
After “Initializing...” is displayed
on the panel display, the panel dis-
play returns to the ready condi-
tion.
Ready
