Installing Options
18
2
H
Lock the paper bank and the
printer with the screw.
I
Replace the second paper tray
(Tray 2) into the printer.
J
Open the lower vertical paper
feed cover on the right side of the
paper bank (
A
). Hang the lock
plate hook in the hole inside (
B
),
and then fasten the plate with the
knob screw using your fingers.
K
Close the lower vertical paper
feed cover.
L
Open the connector cover, and at-
tach the connector cables.
M
Close the connector cover.
Note
❒
Print a configuration page to
confirm that the paper bank is
properly installed. If the paper
bank is properly installed. ⇒
P.144 “Printing the Test Page”
TAPP031E
TAPH221E
TAPP050E
TAPP060E
TAPP070E
