Paper and Other Media
96
8
I
Adjust the paper size dial to
match the size and feed direction
of the paper in the paper tray.
Important
❒
If you want to use paper size
and feed direction that are not
indicated on the paper size dial,
set the dial to "
p
". In this case,
you should specify the paper
size using the operation panel.
⇒ P.132 “Making Printer Settings
with the Operation Panel”
J
Slide the tray into the printer gen-
try until it stops.
Loading Paper in the Bypass
Tray
Reference
For more information on the size
and feed direction of paper that
can be set in the tray, see P.85 “Pa-
per Types and Sizes”.
A
Open the bypass tray.
Note
❒
Swing out the extender (
A
) to
support paper sizes larger than
A4
L
.
B
Slide the paper guides outwards,
and load paper until it stops with
the print side down.
C
Adjust the paper guides to the pa-
per width.
Important
❒
Confirm that the top of the stack
is not higher than the limit mark
of the paper guide.
TAPY090E
TAPH221E
TAPY600E
TAPY610E
TAPY620E
