Printer Doesn't Print
103
9
If you print using Post-
Script driver, printing
does not start or is inter-
rupted.
The data is cleared when the Job Timeout period is exceed-
ed.
❖
Windows 95/98
Set a longer [
Job Timeout
] period with the [
PostScript
] tab
of the Printer Properties.
❖
Windows 3.1x
Set a longer [
Job Timeout
] period with the [
PostScript
] tab
of the Printer Setting dialog box.
❖
Windows NT 4.0
Set a longer [
Job Timeout
] period with the [
Device Settings
]
tab of the Printer Properties.
A PostScript error might occur if there is not enough mem-
ory in the printer, or there are errors in the print data sent to
the printer.
• In some cases, increasing the memory may solve this
problem. Install a memory unit (SIMM). For more infor-
mation on the memory, see P.14 “Installing the Memory
Unit”.
The print job might be reset. Do the following.
• Confirm that you have selected the correct printer driv-
er. Try printing again.
• Set a longer Wait Timeout.
❖
Windows 95/98
Set a longer [
Wait Timeout
] period with the [
PostScript
]
tab of the Printer Properties.
❖
Windows 3.1x
Set a longer [
Wait Timeout
] period with the [
PostScript
]
tab of the Printer Setting dialog box.
❖
Windows NT 4.0
Set a longer [
Wait Timeout
] period with the [
Device Set-
tings
] tab of the Printer Properties.
❖
Macintosh
You can specify a longer [
I/O Timeout
] period on the
printer's operation panel.
⇒
P.129 “Using the Opera-
tion Panel”
Possible Cause Solutions
