Configuring the Printer for the Network
28
3
-
For manual installation
Follow these steps to install the software on your operating system (Windows
95/98).
A Insert the CD-ROM in the CD-ROM drive.
B Close all the applications that are currently running.
C Click
[
Start
]
on the task bar, and click
[
Run
]
.
D Type <Drive>:\IP-P2P\SETUP.EXE (where <Drive> is your CD-ROM drive
name).
E Click
[
OK
]
.
The
[
Welcome
]
dialog box appears.
The remaining steps are identical to F- K in the preceding procedure. ⇒ P.26 “In-
stalling IP Peer-to-Peer”
Installing IPX Peer-to-Peer
The IPX protocol is required for IPX Peer-to-Peer printing. Confirm that the IPX
protocol is installed, if not, install it before starting the following procedure.
Follow these steps to install IPX Peer-to-Peer.
A
Insert the CD-ROM labeled “Print Server Software and Documentation” in
the CD-ROM drive.
The main screen appears.
Note
❒
If Adobe Acrobat Reader 3.0 is not installed, click
[
Install Adobe Acrobat
Reader 3.0
]
.
B
Click
[
CD ROM Contents
]
.
The “Introduction” page appears.
C
Click
[
Installation/Configuration Programs
]
.
The “Configuration Programs” page appears.
D
Click
[
Windows 95/98 & NT 4.x IPX Peer-to-Peer Printing
]
.
The “Windows 95 and NT 4.x IPX Peer-to-Peer Printing” page appears.
This page describes the functions of this utility.
E
At the bottom of the page, click the blue word
[
here
]
to begin installing.
A dialog box appears asking if the “Setup.exe” program should be started.
